The current trend of E-bikes is increasingly implemented and a special bike, needs a special helmet. Speed E-bikes have their own requirements so that users can safely adapt to their use. And one of them is the use of a helmet that complies with the requirements of the NTA Standard 8776. Our E'City helmet was developed to meet the specifics of NTA 8776 as well as its design was designed to match your daily outfit. Apparently, the speed E-Bike helmet looks like a normal bike helmet, including up to the ventilation openings, but the main differences are the greater area of protection of the head and the absorption capacity of a larger impact. The E'city model combines a simple and casual design and contains enough air intakes to ensure good ventilation. The blade will ensure adequate sun shade during commuting. With an easy-to-adjust retention system, adjustable straps and side lock, the E'city includes a set of thermoformed upholstery that aid in the absorption of perspiration.
THE NEW SPEEDE-BIKE HELMET
M: 54 to 59 cm / 21,26 to 22,23´´
L: 58 to 61 cm / 22,83 to 24,02´´
M: 350g / 0,77 lb
L: 360g / 0,79 lb
Standards: NTA 8776
This helmet looks like a bicycle helmet, but protects against higher impact speeds and covers a larger part of the head. In comparison with the bicycle helmet, the S-EPAC helmet offers particularly more protection for the temporal and occipital areas of the head. (EPS w/ cone head)
Chin Pad: Sleek Look without Loose straps
Slim Dial Retention System
The front visor will assure some sun shade during the rides.
The helmet must be kept away from any heat source (do not leave it inside the car or any other place directly or indirectly exposed to solar radiation). High temperatures lead to the deterioration of the helmet and consequent loss of its characteristics (namely the absorption of energy); this means it will fall off any guarantee given by Polisport;
The maximum temperature at which the helmet may be exposed to is 50ºC (112ºF);
The helmet must be cleaned only with water and a soft cloth. The use or application of sprays or cleaning agents, chemical substances (including ammonia) and solvents, may result in the degradation of the characteristics of the helmet (and in the loss of the guarantee);