How to Install Polisport Ignition Cover Protector
How to Install Polisport Ignition Cover Protector

2022-06-09

How to Install Polisport Ignition Cover Protector

Many people ask us about the assembly of our ignitions protectors.

Based on that, we made an article where we explain step by step what you must do on ignition cover protector assembly. For your better understanding of the article, watch the video and follow the steps presented throughout.

Check the complete video:



Step 1 – Position the Motorcycle
Park your motorcycle on a flat, level surface with ample lighting nearby. Ideally, set up outdoors if the weather is clear or indoors with a lot of windows or bright lights. Be sure to have your tools close by.

STEP 2  UNSCREWING THE BOLT STEP
To mount our ignition cover protector, begin by unscrewing the bolt and lowering the rear brake pedal.

STEP 3 — LOOSEN THE PINCH BOLTS
Insert the bushing on the inside of the upper hole on the cover and remove the 4 original ignition cover screws.

STEP 4 — MOUNT THE POLISPORT IGNITION COVER PROTECTOR
Place the Polisport cover over the ignition cover and attach using the 3 stock bolts and washers. Tighten to the Manufacturer’s recommended torque settings as indicated in the owner’s manual.

If you need some help, please feel free to contact us.


We Make Performance Plastics.


Check our Ignition Cover Protectors


#PERFORMANCEPARTS